Cable is in excellent working and cosmetic condition. 2011 Audio Excellence Award Top Prize in USB cable category for USB-1.0SP 2011 Visual Grand Prix Gold Prize in USB cable category for USB-1.0SP 2010 MJ Technology of the year in accessory category Some details from the Acoustic Revive site: USB-1.0SP is equipped with two independent cables consisting of a two-core shielding structure with a 100% shielding effect obtained by using a copper foil. USB-1.0SP employs two A-Plugs for the output side to achieve perfect separation of the signal line and power supply line. A very thick 0.8_ PCOCC-A solid core conductor is used, fully exploiting the limits of USB connectors USB-1.0SP USB cables are 100% Made in Japan and are equipped with a very thick 0.8_ Solid single-core PCOCC-A conductor (the highest diameter USB cable currently available on the market) to achieve an overwhelming D range and F range that was impossible to create by conventional USB cables. The purity of PCOCC-A (annealed PCOCC which does not have crystal grain) exceeds the high purity copper such as 6N when it is made into a cable, and its overwhelming conductivity is far superior. Original USB plug made from a solid block of 2017S air craft grade aluminum alloy to improve vibration control effect. Outer shielding with Carbon SF tube to prevent exterior noise, radiation noise generated from the cable and the electrostatic charge of the cable itself, leading to a perfect separation of the signal line and power supply line. The connection between cable and USB plug is made with a high grade solder for audio use. It is not possible to use this solder for conventional molded USB cables.
Able to meet at Dhoby Ghaut, Bras Basah on weekdays