Magnetic car phone holder/360 degrees rotating magnetic mobile phone magnet (colour: black only)
In-stock: 18 pieces (sold- 3 pieces)
1x strong magnet plate
1x magnet knob
2x wipes (green-wet, pink-dry)
2x steel sheets (3cm diameter)
2x 3M stickers (2.3cm diameter)
1) decide and choose a flat surface on car dashboard to place magnet
2) make sure position chosen is able to let magnet rotate 360 degrees. DO NOT put directly in front of driver's seat where airbags are stored for safety reasons.
3) First, clean dashboard area that you have chosen to put the magnet with the wet wipe provided.
4) Next, clean the dashboard with the dry wipe provided.
5) peel off the 3M tape from the magnet knob
6) place the magnet knob on the desired spot. Press and hold for two minutes.
7) Then, place the strong magnet plate on top of the knob
8) take out the 3M tape from the steel sheet and stick on the back of your handphone OR handphone cover.
Note: Apple mobile phone (iPhone series) on the back of the phone, there is anti-fingerprint coating (usually double-sided adhesive stickers), so when the steel sheet is difficult to paste, it is recommended to paste the steel sheet on the back of the phone case.
9) make sure the steel sheet is in direct contact with the strong metal plate
10) after 24hrs, you can place your handphone on the magnet plate. It is ready for use!