Saving15% Fuel EcoOBD2 Chip Tuning Box ECO OBD2 Benzine Car Plug & Drive Device OBDII ECU Chip
Saving15% Fuel EcoOBD2 Chip Tuning Box ECO OBD2 Benzine Car Plug & Drive Device OBDII ECU Chip
Saving15% Fuel EcoOBD2 Chip Tuning Box ECO OBD2 Benzine Car Plug & Drive Device OBDII ECU Chip
Saving15% Fuel EcoOBD2 Chip Tuning Box ECO OBD2 Benzine Car Plug & Drive Device OBDII ECU Chip
Saving15% Fuel EcoOBD2 Chip Tuning Box ECO OBD2 Benzine Car Plug & Drive Device OBDII ECU Chip

Saving15% Fuel EcoOBD2 Chip Tuning Box ECO OBD2 Benzine Car Plug & Drive Device OBDII ECU Chip

New
S$15
Singapore

Share This With Friends

1. EcoOBD2 is a Plug&Drive Ready device.   2. EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.    3. It works based on OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, EcoOBD2 adjusts itself to the car,  according to the drivers' habits and always keeps remaping the ECU to save fuel lower and immission. Functions:    According to your driving habits, EcoOBD2 makes new map in the car's computer ECU for the vehicle's low fuel consumption.    As you driving much more KM/Mile, it renews the map and adjusts itself to match your car perfectly for more fuel saving.  How Does EcoOBD2 Chip Tuning Box Work?   1. EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to decrease the fuel consumption of your car.    2. When it  plugged into OBD2 connector, EcoOBD2 receives the information from the car computer ECU.   3. With the received data from ECU, EcoOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to decrease the fuel consumption of your car.    4. EcoOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.    5. EcoOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.    6. EcoOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug EcoOBD2 from OBD2 connector. Installation And Calibration:      1 - Pull the Car Key out from the ignition.    2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2    3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)    4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)    5 - Start up the engine.    6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.


Deal Options

Meet-Up

Singapore


Others also viewed

Pedal Shifters For Audi

Pedal Shifters For Audi

S$600

CAR RENTAL & LEASING

CAR RENTAL & LEASING

S$029

225/45/17 Yokohama AD08R

225/45/17 Yokohama AD08R

S$2000

Bumper Clip Bumper Quick Release Password JDM Quick Release -Mitsubishi Lancer GLX XS3

Bumper Clip Bumper Quick Release Password JDM Quick Release -Mitsubishi Lancer GLX XS3

S$02